The power supply system considers the possibility of carrying a high-energy lithium battery with a power of 20Ah and can work continuously for 16 hours when it is full. The battery has stable performance and is light and easy to carry.

The whole is made of various high-quality metal materials, with compact structure and stable performance, ensuring normal operation in various harsh environments and climatic conditions, rain and water spray, and the protection level has reached the national standard of IP65.

, After placing the lamp steadily, take out the lamp cap and fix it on the upper end of the lifting pole and make the lamp cap vertical, and then tighten the locking device on the pole.

2. After confirming that the lamp holder is fixed, the lifting rod can be lifted section by section from top to bottom according to the lighting brightness requirements; after each section of the lifting rod is lifted into place, the corresponding wrench must be pressed and fixed.

3. If you need to adjust the lighting angle and direction of the lamp cap, you can loosen the screw nut that fixes the lamp cap, and then tighten it after adjusting it as needed.

4. Turn on the lamp switch, refer to the "Instruction Manual", in order to ensure the normal discharge time of the lamp 16 hours, the lamp function needs to be adjusted to the state of the working light.

5. After use, first disconnect the lamp switch on the lamp control panel, and open the wrench corresponding to the lifting rod section by section from bottom to top, so that the lifting rod slides gently into place one section by section; unscrew the finger nut and return the lamp head. Note that the surface of the lamp holder is hot and hot, insert the lamp holder into the corresponding position of the box body, close the lamp cover, lock the clasp, and then tighten the handle nut