It has a wide range of applications:
1. It can be applied to areas 1 and 2 in explosive gas environments;
2. LED explosion-proof fluorescent lamps are suitable for IIA, IIB, and IIC explosive gas environments;
3. It is suitable for temperature groups of T1-T4 No; Suitable for minus 30 degrees to minus 60 degrees or so
4. Suitable for energy-saving renovation projects and places where maintenance and replacement are difficult;
5. Suitable for factory or workshop lighting;
Product parameters:
Working voltage: 12V/24V/36V/48V/127V /220V
Rated power: 18W/20W/27W/40W/48W/60W
Dimensions: 41*116*1200mm
Net weight: 2.5kg
Anti-corrosion level: WF2
Protection level: IP65
Safety performance: Waterproof, dustproof, anticorrosive, explosion-proof, anti-corrosion Flammable,
installation method: ceiling type, bracket type, street lamp type,


1. Equipped with T8LED tube, the light source is efficient and energy-saving, which is more than 50% energy-saving than T8 fluorescent tube.

2. Through the unique light distribution design, the light type and light-emitting angle of the LED light source are accurately controlled to avoid light pollution and ineffective light utilization; the light is soft, no glare, does not cause eye fatigue of the operators, and improves work efficiency.

3. The shell is made of lightweight aluminum alloy die-casting, and the surface is treated with high-voltage electrostatic spray.

4. There is a wiring cavity inside the lamp, and there are special wiring terminals. The user can directly enter the wire during installation, and there is no need to install a junction box, which is convenient for installation.

5. When replacing the lamp tube, simply fold off the end cap to directly replace the lamp tube.

6. T5 fluorescent tubes of international famous brands can be selected according to customer requirements, which have high luminous efficiency and are more in line with the actual lighting environment. Compared with T8 fluorescent tubes, it can save about 30% of electricity.

7. It can be equipped with emergency devices according to user requirements. The built-in lamp body is light in weight. When the external power is cut off, the lamp will automatically switch to the emergency lighting state.

The clean fluorescent lamp

shell is made of steel plate compression molding, with high strength and impact resistance. The lampshade is made of polycarbonate injection molding, with high light transmittance and strong impact resistance;

* Emergency devices can be configured according to user requirements. When the emergency power supply is turned on, the lamp will automatically Switch to emergency lighting status;

* Products can be divided into: X: Ceiling type, G: Boom type, H: Guardrail type, F: Flange type, W: Curved rod type

* The built-in ballast is specially made by our company Explosion-proof ballast, its power factor COS>

* Built-in isolation switch, automatically cut off the power when the product is turned on, improve the safety performance of the product; *The lamp adopts a curved sealing structure, which has strong waterproof and dustproof performance;